Classification and usage of Bluetooth earphones

Bluetooth pairing

1. For the first use, try to charge the headphones for about 2-4 hours, and then charge them for 2 hours. The manual also says that it is best not to exceed 4 hours. Some forums say that it is necessary to charge for 24 hours, which is unfounded. Such a small headphone can be charged for 24 hours, which is a bit exaggerated.

2. Click on the Bluetooth settings in the phone settings, select "Enable", and complete. This turns on the Bluetooth support function of the phone.

3. When the Bluetooth earphones are turned off, press and hold the multifunctional button MFB on the earphones for more than 3 seconds, and wait for the blue indicator light on the earphones to turn on (1. Note that it is constantly on during the pairing process, not flashing or not flashing 2. Some devices may also flash alternately in red and blue). At this point, the Bluetooth earphones are in a searchable state.

4. Open the Bluetooth option on your phone, search for it, and after successfully searching for the earphones, the Bluetooth earphone name and model will be displayed on the list. Click confirm.

5. Enter the password (usually 0000) on the phone, and some may not have a password. The headphone indicator light will flash quickly, indicating successful pairing.

6. Click on the Bluetooth earphone name item: MOTOROLA HS850, open it, and select Bind. Done, the phone is now connected to the Bluetooth earphones. At this time, the phone may have a "dong" prompt sound similar to connecting to USB. When turning off the Bluetooth earphones, there may also be a similar prompt sound, which can be used to determine whether the Bluetooth earphones are properly connected to the phone.

If you are only using your phone to communicate with Bluetooth earphones instead of exchanging information with other Bluetooth devices, you can select the bind checkbox.

NFC pairing

Bluetooth earphones that support NFC function can be paired with NFC enabled phones with just a gentle touch, eliminating the traditional tedious pairing process.

use

1. Using voice dialing: Short press the MFB key once (press for no more than 1 second and hear a beep sound), and say the name of the person you want to dial, provided that you store the voice dialing record on your phone.

2. Dial the last call number: Long press the multifunction key to complete redialing.

3. Answering a call: Short press the MFB key once.

4. End call: Short press the MFB key once.

When Bluetooth earphones are plugged into a charger:

1. The indicator light is constantly on, indicating that it is charging.

2. The indicator light is off, indicating that charging is complete.

Bluetooth earphones not plugged in charger:

1. The indicator light is off, indicating that it has been turned off.

2. The indicator light remains on, indicating that pairing mode has been entered.

3. The indicator light flashes rapidly 5 times, indicating successful pairing.

4. The indicator light flashes rapidly once every 3 seconds, indicating that it is in standby mode.

5. The indicator light flashes slowly once every 8 seconds, indicating that it is in a call state.

Usage precautions: When the headphone battery is running low, there will be 5 short beeps every 20 seconds to indicate.

One to two method

Step 1: Pair the first mobile phone with Bluetooth first

1. When the Bluetooth earphones are turned off, long press the smart power button for about 10 seconds (or directly dial the ON/OFF button to the ON state) until the earphone indicator light alternately flashes red and blue, entering the searched state

2. Turn on the Bluetooth function of phone 1, search for Bluetooth devices and find the "device" name of the Bluetooth headset, then click on pairing to complete the connection

Step 2: Pair another phone with Bluetooth earphones

1. Long press the smart power button on the earphones until the indicator light goes out to turn off the Bluetooth earphones, and turn off the Bluetooth of the first phone,

2. Turn on the Bluetooth earphones again to the searched state (flashing red and blue lights)

3. Turn on the Bluetooth function of your phone, search for Bluetooth devices, find the "device" name, click pairing to complete the connection

Step 3: Connect the first phone to the Bluetooth headset again

1. Turn on the Bluetooth function of the first mobile phone and locate the previously connected "Q8", then click to connect

You can complete the intelligent one to two.